DIN rail Managed Industrial Switch
4×10/100/1000Base-TX + 4×1000Base-FX SFP
GWT71414 is a new generation Industrial PoE Managed Switch with 4-Port 10/100/1000Base-TX and 4-Port 1000Base-FX Fast SFP that provide stable and reliable Ethernet transmission offered by GWT, with high quality design and reliability. It is positioning in the broadband network intervention market, to offer and realize Ethernet data exchange, convergence and long-distance optical transmission with efficient bandwidth and reliable fiber optic network solutions for users. The industrial switch complies with various characteristics such as mini size, no fan, low power consumption, high reliability and stability, and easy to maintain.
GWT71414 can offer redundant mechanisms for critical applications that need always-on connections. It can also operate either at standard operating temperature range -40 to 75°C. Housed in rugged DIN rail or wall mountable IP40 enclosures, these switches are perfect choices for harsh environments, such as industrial networking, intelligent transportation systems (ITS) and are also suitable for many
military and utility market applications where environmental conditions exceed commercial product specifications.
High Heat Dissipation Design For Prolong Life
Aluminum case for better heat dissipation and industrial grade temperature -40°~75°, also, the casing is IP40 dust proof and DIN Rail mountable, good for outdoor applicaiton.
Thermally conductive pad connected to PoE and main chipset, and the both side chipset is closely fit to the aluminum case, and the casing is striping style to get the most dissipation performance, so the whole design is very precise and delicate.
R&D User-Friendly Software
SNMP & DHCP
Active SNMPv3, RMON, and Dynamic Host Control Protocol (DHCP). This gives the IT department the ability to add the managed switch to the network, communicate to the managed switch using SNMP, monitor remote traffic and notifications using RMON, and automatically configure IP addresses of the switch and end devices.
Provides users with an intuitive and easy-to-use interface and immediate visual feedback, a GUI also allows a user to open up multiple programs or instances and displays these simultaneously.
The ease of use of GUIs has made it possible for the public in general, regardless of experience or knowledge, to access all kinds of systems for everyday use.
Supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions.
ERPS has a few distinct advantages over RSTP and MSTP. The most obvious is convergence time. Beyond that, the G.8032 protocol is the most universal of the three, and it is available on a wider range of hardware.
There is no theoretical limit on the number of rings that can be added to a network. So as long as you have sufficient bandwidth, you can keep adding nodes.
High Effective PoE+ Solution Especially Suitable For Security Monitoring
Automatic self checking, reboot the device while find it fake dead
Three POE Mode
Disabled , Enable POE , Enabled POE+.Provide both 15.4-watt IEEE 802.3af devices and 30-watt IEEE 802.3at devices without power-socket restriction to provide high-speed transmissions at the same time.
PoE Timing Function
PoE schedule and timing for each PoE port, to extend switch life and reduce power consumption by setting a priority mode for each port. which is a powerful function to help SMBs or enterprises save power and budget. It also increases security by powering off PDs that should not be in use during non-business hours.
Up to 350W, with 4M Buffer Differ your Video Surveillance
|RJ45 Port and Speed||4x10/100/1000Base-Tx|
|Fiber Port and Speed||4x100/1000Base-Fx SFP|
4x100/1000Base-Fx 1x9 Transceivers (Optional)
|Console||1 x RJ45-to-RS232 serial port (115200, 8, N, 1)|
|Ethernet Standards||IEEE 802.3 10BASE-T|
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x flow control and back pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
|IEEE 802.1Q VLAN tagging|
IEEE 802.1ad Q-in-Q VLAN stacking
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
ITU G.8032 ERPS Ring
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP v1
RFC 2236 IGMP v2
|MAC Address Table||8K|
|Transmission Mode||Store and Forward (full/half duplex mode)|
|Exchange Property||Delay time: < 7ps|
Backplane bandwidth: 20Gbps; Packet forwarding rate: 14.88Mpps
|PoE Standard||4xIEEE 802.3af/IEEE 802.3at PoE|
|Power Budget||Max. PoE output power budget 30W|
|RJ45||Link/Act: connect-always; data exchange-twinkle|
|Fiber||Link/Act: connect-always; data exchange-twinkle|
|Power Access Mode||Phoenix terminal|
|Redundant Power Input||DC 9-56V|
|Protection Grade||IP40 aluminum case|
|Cooling Mode||Natural cooling, no fan design|
|Installation Mode||DIN trail/wall-mountable|
|Weight||650g (With PoE: 700g)|
|Operating Humidity||5%~90% non-condensing|
|Defects Liability Period||5 year warranty, lifetime technical support|
|EMC||FCC Part15 Class A|
EN61000-4-2 (ESD), EN61000-4-3 (RS)
EN6100044 (EFT), EN6100045 (Surge)
EN61000^1-6 (CS), EN61000-4-8
-40~75°C High and Low Temperature Test
IP40 Protection Test
|Software Features||Redundant network:|
STP, RSTP, MSTP, IT-T G.8032 Ethernet Ring Protection Switching (ERPS)for redundant cabling
ERPS/ Ring for Redundant Cabling, recovery time<20ms in 250 devices
Multicast: IGMP snooping V1/V2/V3
VLAN: IEEE 802.1Q4K VLAN, GVRP, GMRP, QINQ
Link Aggregation: Dynamic IEEE 802.3ad LACP Link Aggregation, Static Link Aggregation
Management Function: CLI, Web based management, SNMP v1/v2c/v3, Telnet/SSH server for management
Diagnostic Maintenance: Port mirroring, Ping
Alarm management: 1 way relay alarm output, RMON, SNMP Trap
RMON, MIBII, Port mirroring, Event syslog, DNS, SNTP, IEEE 802.1ab LLDP
Security: DHCP Server/Client/Relay option 82/Snooping User hierarchical management
Flexibility security: Port based and MAC based IEEE 802.1X, ACL, HTTP/HTTPS, SSL/SSH v2
Data control Port-based ingress/egress speed limit, Full duplex IEEE 802.3x, half duplex back-pressure flow control.
Broadcast storm suppression, Un known-Multicast suppression and Unknown-Unicast suppression
Software upgrade via HTTP, redundant firmware to avoid upgrade failure